Makerspace Materials Price List
The St. Charles Parish Library Makerspace and its tools are available for use by members of the St. Charles Parish community.
Library programs held in the Makerspace are always free for participants, including materials and supplies used during the program.
Free materials, including scrap, partially used, and donated supplies, may be available for individual use.
New materials provided by the library are available for purchase in limited quantities.
For certain tools, only library-provided materials may be used to ensure safety and quality. These tools have an asterisk (*) next to them.
All other materials will be inspected and approved by Makerspace staff before use.
* 3D Printer | |
|---|---|
| 3D prints are priced per gram plus a $1.00 surcharge. | |
PLA Plastic - per gram | $0.05 |
Specialty Filament - per gram | $0.05 |
Book Binder | |
|---|---|
Coil binding - thin | $0.25 |
Coil binding - thick | $0.50 |
Coil binding - clear cover | $0.25 |
Thermal binding - soft cover | $1.50 |
Thermal binding - hard cover | $5.00 |
* Button Maker | |
|---|---|
Pin back - 1 inch | $0.25 |
Pin back - 1.5 inches | $0.25 |
Pin back - 2.25 inches | $0.25 |
Magnet back - 1 inch | $0.50 |
Magnet back - 1.5 inches | $0.50 |
Magnet back - 2.25 inches | $0.50 |
Cricut | |
|---|---|
Stick on vinyl - 12" x 12” | $0.50 |
Heat transfer vinyl - 12" x 12" | $1.00 |
Cardstock - 12" x 12” | $0.25 |
Laser Cutter | |
|---|---|
Wood sheet - 4" x 4" | $0.50 |
Wood sheet - 12" x 12” | $1.50 |
Wood sheet - 12" x 24” | $3.50 |
Acrylic sheet - 5" x 7" | $2.00 |
Acrylic sheet - 8" x 10" | $4.00 |
Acrylic sheet - 12” x 12” | $5.00 |
Acrylic sheet - 12" x 16" | $6.00 |
Chipboard - 9" x 12” | $0.50 |
Metal business card | $0.10 |
* Sticker Maker | |
|---|---|
Sticker adhesive - per inch | $0.10 |
* Sublimation Printer | |
|---|---|
Paper sheet - 4" x 9.5" | $0.50 |
Paper sheet - 8.5" x 11" | $1.00 |
Paper sheet - 8.5" x 14" | $2.00 |
Paper sheet - 11" x 17" | $3.00 |
Paper sheet - 13" x 19" | $3.00 |
* Tool requires the use of library-provided materials only. All other materials must be inspected and approved by Makerspace staff before use.